KASTAR Waterproof Grout for Swimming Pool

Features

Technical data of Kastar Swimming pool grout

TECHNICAL DATA  (at +25°C)
Components	Pilyaspartic(part A)+Isocynate(part B)
Appearance	Paste, Glossy
Shelf life	12 months
Work time	20 mins
Specification	400ml/530g gross
Colors	Regular 12 colors and workable for required colors to custmize.
Tensile Shear Strength	≥12 MPa
Hardness	≥80 (Shore D)
Yellowing resistant	50 years
Construction work time	With 20 mins
Dry time	About 12 hours (under 25 ℃)
Remove excess grout time	After 6 hours.

Kastar Swimming pool grout is engineered to have strong chemical resistance, helping you build a durable, long-lasting swimming pool.

The smart solutions in our range of swimming pool grouts also work to combat high humidity, erosion from water movement (to which grout at the waterline is particularly exposed), as well as chemical damage caused by vigorous, deep cleansing procedures.

When Kastar Swimming pool grout is used, your pool will be watertight and will maintain the utmost levels of adhesion and flexibility.

Kastar Swimming pool grouts have got all your cover from jobs around the home to waterproof sealing for foundations, basement damp proofing, and swimming pools.

Final Performance

Instructions

1. Spray the adhesive for 30cm before officially using it, in case the front part adhesive didn’t mix very well.
2. To ensure a good effect, pls use the caulking guns equipped with this adhesive.
3. It will take 20 mins for the surface dry under 25°, and about 4 hours for totally dry.
4. Please clean with water immediately if it touches your eyes, keep this product beyond the place where children can touch it.
5. This product should be sealed and stored in a cool dry place.

Package

400ml/bottle, 530g gross weight per bottle, 20 pcs/carton, Carton size: 370*240*240 mm

Application tools

Caulking gun; Blade Scraper; Stress ball; Mask tape, Unbinding Wax

Application Way

Procedure

1. Twist off the cover of the bottle
2. According to the size of the gap, prepare the mouth of the nozzle.
3. Put the nozzle on the bottle
4. Load the product into the caulking gun
5. In application, remove the space lugs and excessive adhesive or loose foreign material from the grouting groove. Preferably use the vacuum cleaner for cleaning.
6. Squeeze about 30cm volume from the nozzle tip and discard
7. Squeeze the grout into the tile groove.
8. Repeat the grouting if required.
9. Use a ball shape to press into the groove
10. Keep it for 4hours
11. Remove the excess grout with a blade scrapper.
12. Use masking tapes along the tile edges for rough tiles before grouting

Recommendation

Kastar Swimming pool grout does not ensure perfect adhesion when used for grouting tiles with wet edges or contaminated with cement, dust, oil, grease, etc.

Unglazed tiles should be grouted with the same color tone Kastar ceramic tile sealer.

All other colors should be used only with glazed tiles.

Do not use Kastar Ceramic Tile Sealer for grouting mosaic tiles because they are difficult to clean.

CHEMICAL RESISTANCE OF KASTAR SWIMMING POOL GROUT WITH KASTAR

Group	Name	Concentration %	Laboratory benches	Permanently	Sporadically
				used (+20°C)	used (+20°C)
Acids	Acetic acid	2.5 5 10	+ + –	+ (+) –	+ + –
	Hydrochloric acid	37	+	+	+
	Chromic acid	20	–	–	–
	Citric acid	10	+	+	+
	Formic acid	2.5 10	+ –	+ –	+ –
	Lactic acid	2.5 5 10	+ + (+)	+ + (+)	+ + (+)
	Nitric acid	25 50	+ –	+ –	+ –
	Pure oleic acid		–	–	–
	Phosphoric acid	50 75	+ (+)	+ –	+ (+)
	Sulphuric acid	1.5 50 96	+ + –	+ (+) –	+ + –
	Tannic acid	10	+	+	+
	Tartaric acid	10	+	+	+
	Oxalic acid	10	+	+	+
Alkalis	Ammonia in solution	25	+	+	+
	Caustic soda	50	+	+	+
	Sodium hypochlorite in solution: active chlorine active chlorine	6.4 g/l 162    g/l	+ –	(+) –	+ –
	Potassium permanganate	5 10	+ (+)	(+) –	+ (+)
	Potassium hydroxide	50	+	+	+
	Sodium bisulphite	10	+	+	+
Saturatedsolutionsat +20°C	Saturatedsolutionsat		+	+	+
	Sodium hyposulphite		+	+	+
	Calcium chloride		+	+	+
	Ferric chloride		+	+	+
	Sodium chloride		+	+	+
	Sodium chromate		+	+	+
	Sugar		+	+	+
	Aluminium sulphate		+	+	+
Oils and fuels	Petrol, fuels		+	(+)	+
	Turpentine		+	+	+
	Diesel fuel		+	+	+
	Tar oil		+	(+)	(+)
	Olive oil		(+)	(+)	+
	Light fuel oil		+	+	+
	Petrol		+	+	+
Solvents	Acetone		–	–	–
	Ethylene glycol		+	+	+
	Glycerine		+	+	+
	Methylene glycol acetate		–	–	–
	Perchloroethylene		–	–	–
	Carbon tetrachloride		(+)	–	(+)
	Ethyl alcohol		+	(+)	+
	Trichloroethylene		–	–	–
	Chloroform		–	–	–
	Methylene chlorid		–	–	–
	Tetrahydrofurane		–	–	–
	Toluene		–	–	(+)
	Carbon sulphide		(+)		+
	White spirit		+	+	–
	Benzene		–	–	–
	Trichloroethane		–	–	–
	Xylene		–	–	+
	Mercuric chloride (HgCl2)	5	+	+
	Hydrogen peroxide	1 10 25	+ + +	+ + (+)	+ + +
Remark:	+ excellent resistance		(+) good resistance		– poor resistance

* Evaluated in compliance with EN 12808-1 standards

Coverage Data Sheet